Wave Springs
Wave Spring Washers
Custom wave spring washers manufactured to your drawing, load and material requirements.
Request a Quote- Reference configurations
- Made to order
- Wire / thickness
- Thickness 0.2 - 2 mm typical
- Outside diameter / envelope
- 6 - 150 mm typical
- Free length / height
- Height 0.5 - 4 mm typical
Custom Wave Spring Washers
CustomSprings manufactures wave spring washers to drawing. This category is made to order: there is no fixed public stock list, so the figures below are a typical capability range, not a catalog of stocked parts.
Typical Capability Range
Wire / thickness: Thickness 0.2 – 2 mm typical
Outside diameter / envelope: 6 – 150 mm typical
Free length / height: Height 0.5 – 4 mm typical
Materials: Carbon spring steel, 301 stainless
Standards / design reference: General wave-washer design practice; confirm bolt/bore fit from drawing
Why There Is No Fixed Spec Table
Sized to the fastener or bearing bore; not sold from a fixed public catalog.
Information Needed for a Quote
Send the wire/material thickness, outside or inside diameter or envelope size, free length or height, working load or force, material, operating environment and required quantity. Uploading a PDF, DWG, DXF, STEP or IGES drawing is recommended and, for this category, strongly advised.
Made to Order
No Fixed Stock List for This Category
Sized to the fastener or bearing bore; not sold from a fixed public catalog.
Standards / design reference: General wave-washer design practice; confirm bolt/bore fit from drawing
Materials: Carbon spring steel, 301 stainless
CustomSprings Engineering Catalog
Request This Spring
Send your dimensions, quantity and drawing for engineering review.