Custom Spring Product Family
Custom flat springs, metal spring clips, contact springs and stamped elastic components made from strip or sheet to drawing, with geometry tailored to retention, switching, contact and assembly functions.
Flat Springs & Stampings
Custom Battery Coil Contact Springs manufactured to your drawing, dimensions, load or torque, material, working environment and production requirements.
Flat Springs & Stampings
Flat battery contacts and grounding spring enquiries defined by the contact function, installation geometry and required contact force.
Flat Springs & Stampings
Flat-strip spring elements that flex from a fixed region to provide contact force, retention or return in thin assemblies where round-wire coils would take too much space.
Flat Springs & Stampings
Flat spring elements fixed at one end, specified by active length, support details and force at the moving contact.
Flat Springs & Stampings
Custom Conpower / Pre-Stressed Power Springs manufactured to your drawing, dimensions, load or torque, material, working environment and production requirements.
Flat Springs & Stampings
Custom Constant Force Springs manufactured to your drawing, dimensions, load or torque, material, working environment and production requirements.
Flat Springs & Stampings
Custom Constant Torque / Contorque Springs manufactured to your drawing, dimensions, load or torque, material, working environment and production requirements.
Flat Springs & Stampings
Formed leaf contacts specified by their fixed support, mating contact surface and force at installed deflection.
Flat Springs & Stampings
Custom conductive spring contacts for batteries, grounding points and electrical interfaces where the part must maintain contact pressure while carrying current or bonding surfaces.
Flat Springs & Stampings
Custom Conventional Power Springs manufactured to your drawing, dimensions, load or torque, material, working environment and production requirements.
Flat Springs & Stampings
Formed strip springs and stamped parts specified by finished geometry, functional bends and any required elastic movement.
Flat Springs & Stampings
Motor brush spring enquiries specified by brush-holder geometry and the pressure needed across the usable brush movement.
Flat Springs & Stampings
Custom Multi-Leaf Springs manufactured to your drawing, dimensions, load or torque, material, working environment and production requirements.
Flat Springs & Stampings
Custom Parabolic Leaf Springs manufactured to your drawing, dimensions, load or torque, material, working environment and production requirements.
Flat Springs & Stampings
Custom Single / Mono Leaf Springs manufactured to your drawing, dimensions, load or torque, material, working environment and production requirements.
Flat Springs & Stampings
Thin formed spring elements for tactile switches and snap-action controls where force profile, travel and repeatable actuation feel are the primary requirements.
Flat Springs & Stampings
Spring clip enquiries defined by the mating part, insertion movement, retention requirement and release method.
Flat Springs & Stampings
Twin-coil strip brush spring layouts defined by both coil locations, the connecting strip and the required brush-contact force.
Product Family Overview
Flat spring parts develop force through bends, cantilever sections, formed ribs, domes or contact features rather than a round-wire helical body. Strip thickness, rolling direction, bend radius, edge condition and material temper all influence how the part forms and how consistently it returns after deflection.
Selection
This category focuses on stamped or formed strip parts. Round-wire spring clips, hooks and rings belong in the Wire Forms category.
Use cantilever sections when force is produced by bending a strip or stamped arm through a defined deflection.
Flat spring clips can grip, retain or locate another part and often need controlled insertion force, pull-off force and edge condition.
Contact springs add conductivity, plating, contact pressure, wiping motion and surface cleanliness to the mechanical spring requirement.
Custom Manufacturing Data
Most flat springs and spring clips are drawing-specific rather than catalog-size products. The practical range depends on strip thickness, bend geometry, material temper, tooling access and the required elastic travel.
Custom RFQ
A flat-pattern or formed drawing helps separate critical spring features from non-critical outline dimensions.
Project Support
Use the product pages for specific spring geometry, then continue with application, material, manufacturing or engineering information as needed.
Applications
Review where spring styles work well, assembly constraints and alternative designs.
View spring applications →Materials
Compare strength, corrosion, temperature, fatigue and conductivity before choosing a grade.
Compare spring materials →Manufacturing
See how forming, heat treatment, inspection, first articles and repeat production are reviewed.
View manufacturing capabilities →Engineering Data
Use material, wire-diameter and standard guides to support spring selection and drawing preparation.
Open Spring Engineering Guide →CustomSprings Engineering Catalog
Choose the spring family and exact type first. Dimensional fields are optional and are used where that product family has comparable reference dimensions.
